The SFCII-30 Finish Cut Walk-Behind Mower is big on productivity and versatility, yet is easy to maneuver. This mower is also extra tough with a 14-gauge steel deck so you can count on getting a professional quality-of-cut at home or on the job for years to come.
Handle cut grass the way you want, whether it’s side-discharging, mulching or bagging. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag.
Front swivel caster wheels ensure ease of maneuverability in highly landscaped areas.
Strong stamped 14-gauge steel deck shell with 14-gauge steel reinforcement plate plus side wear-guards for extra protection.
Extra-strong, fully fabricated steel frame (not cast aluminum).
Single lever height-of-cut adjustment. Refine your height settings with adjustments from 1.5” to 5” in .5” increments.
Less complex and easier to maintain than traditional timed deck setups, an offset blade setup can reduce belt replacement time by up to half compared to timed deck systems.
The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.
Ultra-comfortable, highly ergonomic control system makes operation easy hour after hour.
Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment up and down into 5 positions so it’s easy to find your sweet spot.
Handle cut grass the way you want, whether it’s side-discharging, mulching or bagging. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag.
Dependable and efficient Kohler Command Pro CV224 engine provides exceptional performance. Proven maintenance-free GT MV 702 transmission delivers dependable drive power.
| Model | Deck Width | Engine | Horsepower | MSRP |
|---|---|---|---|---|
SFCII-30-7CV-S  | 30″ | Kohler® Command PRO® CV224 | 7 | $2,999 |
Pre-production unit shown in photos. Actual product may vary. Specifications subject to change.
Because we strive to continually improve our products, Scag reserves the right to make changes at any time without notice or obligation.
| Product Dimensions* | 30″ |
|---|---|
| Length – Minimum (handles in highest operating position) | 67.25″ |
| Length – Max (handles in lowest operating position) | 75″ |
| Tracking Width | 29.75″ |
| Width (with chute) | 36.75″ |
| Width (with block-off plate) | 32.5″ |
| Height – Lowest Operating | 35.5″ |
| Height – Max Operating | 48″ |
| Operating Weight – Bagging | 202 lbs. |
* Dimensions are approximate.
Pre-production unit shown in photos. Actual product may vary. Specifications subject to change.
Because we strive to continually improve our products, Scag reserves the right to make changes at any time without notice or obligation.
| General | |
|---|---|
| Total Fuel Capacity | 1 gallon |
| Drive Tires | 10.5″ x 3″ |
| Caster Tires | 9” x 2.25” |
| Drive System | |
| Drive System Type | GT MV 702 Transmission |
| Pumps | N/A |
| Motors | N/A |
| Forward Ground Speed | Up to 3.5 mph |
| Reverse Ground Speed | N/A |
| Parking Brake | Hand lever |
| Deck | |
| Cutting Widths | 30″ |
| Type | Extra-strong, stamped steel cutter deck. Offset blade, non-timed deck setup. |
| Cutting Height | 1.5″ to 5″ in .5″ increments. |
| Lift | Hand lever. Single-point adjustment. |
| Construction | 14-gauge, stamped steel deck shell with 14-gauge spindle reinforcement plate. Side reinforcement plates offer extra protection against impacts. |
| Spindles | Aluminum housing with sealed ball bearings. |
| Blade Engagement | Blade brake clutch allows operator to disengage cutter blades without shutting off the machine. |
Pre-production unit shown in photos. Actual product may vary. Specifications subject to change.
Because we strive to continually improve our products, Scag reserves the right to make changes at any time without notice or obligation.
© Copyright 2025 SCAG Power Equipment
A division of 
Don’t miss out on limited time savings on select Scag new/unused zero-turn mowers.
0% financing is available for up to 60 months on Select Freedom Z Models with approved financing.
Monthly payments on Select Liberty Z Models as low as $90/month.
Program Details:
